WCDMA RAN Systems and Site Introduction. RBS components. WCDMA RBS Maintenance. 2. Customer Product Information (CPI) and. TXO Systems has the ERICSSON RBS RRUS 12 B3 in stock, along with a wide range of used and refurbished telecommunications equipment from all. Ericsson shall have no liability for any error or damage of any kind resulting from The support system for the RBS main unit is available in two variants.
|Published (Last):||5 August 2013|
|PDF File Size:||9.68 Mb|
|ePub File Size:||14.94 Mb|
|Price:||Free* [*Free Regsitration Required]|
Delivery times may vary, especially during peak periods. Place the main unit in the rack and tighten the rack screws on the brackets according to the rack supplier’s specification. Insert the power cable wires into each dedicated tension clamp connection and check that they are properly fastened.
Ericsson RBS 6601 LTE Indoor Main Unit Remote Base Station 1/bfl 901 009/4
Sign in to check out Check out as guest. To complete the main unit cabling: See the manufacturer’s specification for further details. The DC power supply must be equipped with an external fuse or circuit breaker.
Strip off 12 mm of each wire using the cable shield cutter. If applicable, check that the optical indicators next to the optical cables interfaces on the DU are flashing. The cable connections depend on the transmission alternative chosen for the specific site. Information about on-site space requirements can be found in RBS Description and in the manual for the rack.
Unpack the TCU and verify that it is not damaged. Check that each cable is as straight as possible and make any necessary adjustments.
Back to home page Return to top. Clean the site and remove objects such as wrapping paper and cable clippings.
BTS FOR ERICSSON RBS – BFL /1 R3A – DUW 20 01 – KDU /2 R3B | eBay
Follow steps 1 and 2 as described in Section If the distance is less than 50 mm, the brackets must be adjusted, rsb Step 2. Be the first to write a review. Each alarm signal wire is connected to the removable alarm connector. Detailed information about optical indicators can be found in Indicators, Buttons, and Switches.
ERICSSON – RBS RRUS 12 B3 – TXO Systems
To adjust the main unit using standard brackets: Watch list is full. Learn More – opens in a new window or tab International shipping and import charges paid to Pitney Bowes Inc. Seller does not offer returns. Strip 7 mm of each wire using the cable shield cutter.
ericsson rbs 6601
Check that the items delivered correspond to the packing list. Tighten the rack screws at the brackets according to the rack supplier’s specification. If the rack is equipped with a door, measure the distance between the front of the main unit and the door. If a multi—strand wire is used, the end of the wire should be tinned or provided with a wire end ferrule.
Delivery times for all other countries will be available upon request, as they differ on a case-by-case basis. Contact the seller – opens in a new window or tab and request a shipping method to your location.
Switch on the site power. Slot 2 is the upper position in the main unit. This document describes how to install the RBS on site and how to connect it to external interfaces.
Electrical details of the alarm connector can be found in RBS Description. This item will be shipped through the Global Shipping Program and includes international tracking. Dispose of waste according to local regulations.